Service Manual

0x000001ad 520 52 10000 0.20% 0.30% 0.16%
0 lacp
0x000004ba 330 33 10000 0.20% 0.36% 0.09%
0 clish
0x000000c9 1240 124 10000 0.20% 0.15% 0.44%
0 nvmgr
0x000000e0 530 53 10000 0.20% 0.12% 0.16%
0 igmp
0x00000132 420 42 10000 0.20% 0.10% 0.13%
0 vrrp
0x0000028d 410 41 10000 0.20% 0.05% 0.12%
0 ovsdbsvr
0x000000a9 200 20 10000 0.20% 0.03% 0.06%
0 arpm
0x00000253 100 10 10000 0.20% 0.02% 0.02%
0 otm
0x00000206 140 14 10000 0.20% 0.02% 0.03%
0 tnlmgr
0x00000012 1290 129 10000 0.00% 0.10% 0.12%
0 mount_mfs
0x0000024d 40 40 10000 0.00% 0.08% 0.14%
0 xstp
Dell#
Related
Commands
• show hardware layer2 acl — displays Layer 2 ACL data for the selected stack
member and stack member port-pipe.
• show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack
member and stack member port-pipe.
• show hardware stack-unit — displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
• show hardware system-flow — displays Layer 3 ACL or QoS data for the selected
stack member and stack member port-pipe.
• show interfaces stack-unit — displays information on all interfaces on a specific S-
Series stack member.
• show processes memory (S-Series) — displays CPU usage information based on
processes running in an S-Series.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control
processor’s SWPQ statistics.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Control and Monitoring 166