Service Manual

match external {1 |
2}
(OPTIONAL) Enter the keywords match external then the
numbers 1 or 2 to indicated that external 1 routes or external 2
routes should be redistributed.
match internal (OPTIONAL) Enter the keywords match internal to indicate
that internal routes should be redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number as the
metric value. The range is from 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a
configured route map.
Defaults Not configured.
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
Routing Information Protocol (RIP) 1646