Service Manual

The following is sample output of the show login statistics unsuccessful-
attempts user login-id command.
Dell# show login statistics unsuccessful-attempts user admin
There were 3 unsuccessful login attempt(s) for user admin in last
12 day(s).
The following is sample output of the show login statistics successful-
attempts command.
Dell#show login statistics successful-attempts
There were 4 successful login attempt(s) for user admin in last
30 day(s).
Related
Commands
• login statistics — enable and configure user login statistics on console and virtual
terminal lines.
• login concurrent-session — configures the limit of concurrent sessions for all
users on console and virtual terminal lines.
show memory
View current memory usage on the switch.
Syntax
show memory [stack-unit id]
Parameters
stack-unit id (OPTIONAL) Enter the keyword stack-unit then the stack unit
ID to display memory information on the designated stack
member.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
Control and Monitoring 162