Service Manual

Table Of Contents

qos-policy qos-

policy-name

(OPTIONAL) Enter the keywords qos-policy then the QoS

policy name assigned to the queue in text format (32 characters

maximum). This specifies the input QoS policy assigned to the

queue under policy-map-input and output QoS policy under

policy-map-output context.

Defaults none

Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.1 Introduced on the E-Series.

Usage Information There are eight queues per interface on the S6000 and four queues on the S-Series.

This command assigns a class map or QoS policy to different queues.

Commands

• class-map — identifies the class map.

• service-policy input — applies an input policy map to the selected interface.

• service-policy output — applies an output policy map to the selected interface.

Quality of Service (QoS) 1593