Service Manual

Table Of Contents

set-color value (Optional) Enter the keyword set-color followed by a color

value. Traffic that fulfills the match criteria is marked with the

color value that you specify. The default value is Yellow.

Defaults none

Command Modes CLASS-MAP CONFIGURATION (config-class-map)

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Added the DSCP Marking option support on the S-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series; added support for the DSCP

Marking option.

6.1.1.1 Introduced on the E-Series.

Usage Information To access this command, enter the class-map command. After the class map is

identified, you can configure the match criteria. For class-map match-any, a maximum

of five ACL match criteria are allowed. For class-map match-all, only one ACL

match criteria is allowed.

Commands

• class-map — identifies the class map.

Quality of Service (QoS) 1570