Service Manual

When you create a class map to filter protocol traffic for CoPP, you must enter the
keyword cpu-qos .
Related
Commands
• ip access-list extended — configures an extended IP ACL.
• ip access-list standard — configures a standard IP ACL.
• match ip access-group — configures the match criteria based on the access
control list (ACL).
• match ip precedence — identifies the IP precedence values as match criteria.
• match ip dscp — configures the match criteria based on the DSCP value.
• match mac access-group — configures a match criterion for a class map based
on the contents of the designated MAC ACL.
• match mac dot1p — configures a match criterion for a class map based on a
dot1p value.
• match mac vlan — configures a match criterion for a class map based on VLAN
ID.
• service-queue — assigns a class map and QoS policy to different queues.
• show qos class-map — views the current class map information.
clear qos statistics
Clear qos statistics clears statistics from show qos statistics.
S4048–ON
Syntax
clear qos statistics interface-name
Parameters
interface-name Enter one of the following keywords:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Quality of Service (QoS) 1567