Service Manual

Parameters
percentage Enter the percentage assignment of bandwidth to the class/
queue. The range is from 1 to 100% (granularity 1%).
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.1.9.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.2.1.1 Introduced on the E-Series.
Usage Information
The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages given
to all eight classes exceeds 100%, the bandwidth percentage automatically scales down
to 100%.
Related
Commands
• qos-policy-output — creates a QoS output policy.
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality-of-service
policies to each class.
S4048–ON
Syntax
class-map {match-all | match-any} class-map-name [cpu-qos]
[layer2]
Parameters
match-all Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords match-all to determine that
Quality of Service (QoS) 1565