Service Manual

show spanning-tree pvst
View the Per-VLAN spanning tree configuration.
S4048
Syntax
show spanning-tree pvst [vlan vlan-id] [brief] [guard]
Parameters
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID. The
range is 1 to 4094.
brief (OPTIONAL) Enter the keyword brief to view a synopsis of the
PVST+ configuration information.
interface (OPTIONAL) Enter one of the interface keywords along with the
slot/port information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keyword port-
channel then a number:
guard (OPTIONAL) Enter the keyword guard to display the type of
guard enabled on a PVST interface and the current port state.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
Per-VLAN Spanning Tree Plus (PVST+) 1542