Service Manual

Field Description
Interface List the interface type, with either slot/port information or ID
(VLAN or Port Channel), of the interfaces participating in PIM.
Ver/Mode Displays the PIM version number and mode for each interface
participating in PIM:
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of PIM neighbors discovered over this
interface.
Query Intvl Displays the query interval for Router Query messages on that
interface (configured with ip pim query-interval
command).
DR Prio Displays the Designated Router priority value configured on the
interface (use the ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that
interface.
The show ip pim interface command does not display information corresponding
to the loop-back interfaces.
Example
Dell# show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prio
165.87.34.5 Te 1/10 v2/S 0 30 1
165.87.34.5
10.1.1.2 Vl 10 v2/S 1 30 1 10.1.1.2
20.1.1.5 Vl 20 v2/S 1 30 1 20.1.1.5
165.87.31.200 Vl 30 v2/S 1 30 1
165.87.31.201
Dell#
show ip pim neighbor
View PIM neighbors.
S4048–ON
Syntax
show ip pim [vrf vrf-name] neighbor
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to configure this setting on that VRF.
PIM-Sparse Mode (PIM-SM) 1505