Service Manual

not-advertise (OPTIONAL) Enter the keywords not-advertise to suppress
that match the network prefix/mask pair.
tag tag-value (OPTIONAL) Enter the keyword tag then a value to match on
routes redistributed through a route map. The range is from 0 to
4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.1 Introduced on the E-Series.
Usage Information
The area range command summarizes routes for the different areas.
With the not-advertise parameter configured, you can use this command to filter
out some external routes. For example, if you want to redistribute static routes to OSPF,
but you don't want OSPF to advertise routes with prefix 1.1.0.0, you can configure the
summary-address 1.1.0.0 255.255.0.0 not-advertise to filter out all the routes fall in
range 1.1.0.0/16.
Related
Commands
• area range — summarize routes within an area.
Open Shortest Path First (OSPFv2 and OSPFv3) 1427