Service Manual

Version Description
pre- 6.1.1.1 Introduced on the E-Series.
Usage Information To redistribute the default route (0.0.0.0/0), configure the default-information
originate command.
Despite removing an OSPF process globally, the OSPF process is not completely
removed from the BGP configuration.
Related
Commands
• default-information originate — generate a default route into the OSPF routing
domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
S4048–ON
Syntax
redistribute bgp as number [metric metric-value] | [metric-type
type-value] | [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric
metric-value] | [metric-type type-value] [route-map map-name] [tag
tag-value] command.
Parameters
as number Enter the autonomous system number. The range is from 1 to
65535.
metric metric-
value
(OPTIONAL) Enter the keyword metric then the metric-value
number. The range is from 0 to16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the
following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of
the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Defaults None
Command Modes ROUTER OSPF
Open Shortest Path First (OSPFv2 and OSPFv3) 1385