Service Manual

Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Related
Commands
• show ip ospf asbr — display the VLAN configuration.
distance
Define an administrative distance for particular routes to a specific IP address.
S4048–ON
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask access-
list-name] command.
Parameters
weight Specify an administrative distance. The range is from 1 to 255.
The default is 110.
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If
you enter a router ID, include the mask for that router address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n format.
access-list-name (OPTIONAL) Enter the name of an IP standard access list, up to
140 characters.
Defaults 110
Open Shortest Path First (OSPFv2 and OSPFv3) 1357