Service Manual

neighbor router-
id
(OPTIONAL) Enter the keyword neighbor then the neighbor’s
router-id in dotted decimal format (A.B.C.D.).
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Related
Commands
• show ip ospf statistics — display the OSPF statistics.
debug ip ospf
Display debug information on OSPF. Entering the debug ip ospf commands enables OSPF debugging for
the first OSPF process.
S4048–ON
Syntax
debug ip ospf [process-id] [vrf vrf-name] [bfd |event | packet |
spf | database-timer rate-limit]
To cancel the debug command, use the no debug ip ospf command.
Open Shortest Path First (OSPFv2 and OSPFv3) 1351