Service Manual

track ip host reachability
Configure object tracking on the reachability of an IPv4 host.
Syntax
track object-id ip host host-ip-address/prefix-len reachability
[vrf vrf-name]
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to 500.
ip-address/
prefix-len
Enter an IPv4 address in dotted decimal format. The valid IPv4
prefix lengths are from /0 to /32.
vrf vrf-name (Optional) You can configure a VPN routing and forwarding
(VRF) instance to specify the virtual routing table to which the
tracked route belongs.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4820T, S4810, S6000, S5000, Z9000,
Z9500, IOA, and MXL.
track ip route metric threshold
Configure object tracking on the threshold of an IPv4 route metric.
Syntax
track object-id ip route ip-address/prefix-len metric threshold
[vrf vrf-name]
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to 500.
ip-address/
prefix-len
Enter an IPv4 address in dotted decimal format. The valid IPv4
prefix lengths are from /0 to /32.
Object Tracking 1330