Service Manual

Parameters
object-id (OPTIONAL) Display information on the specified tracked object.
The range is 1 to 500.
interface (OPTIONAL) Display information on all tracked interfaces (Layer
2 and IPv4 Layer 3).
ip route (OPTIONAL) Display information on all tracked IPv4 routes.
resolution (OPTIONAL) Display information on the configured resolution
values used to scale protocol-specific route metrics. The range
is 0 to 255.
brief (OPTIONAL) Display a single line summary of the tracking
information for a specified object, object type, or all tracked
objects.
vrf vrf-name (OPTIONAL) E-Series only: Display information on only the
tracked objects that are members of the specified VRF instance.
The maximum is 32 characters. If you do not enter a VRF name,
information on the tracked objects from all VRFs displays.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information The following describes the show track command shown in the Example below.
Output Description
Track object-id Displays the number of the tracked object.
Interface type
slot/port, IP route
ip-address, IPv6
route ipv6-
address
Displays the interface type and slot/port number or address of
the IPv4/IPv6 route that is being tracked.
object is Up/
Down
Up/Down state of tracked object; for example, IPv4 interface,
reachability or metric threshold of an IP route.
Object Tracking 1324