Service Manual

BPDU (MRecords): sent 21, received 9
The port is not in the Edge port mode
Usage Information The following describes the show spanning-tree msti 5 guard command shown
in the following example.
Field Description
Interface Name MSTP interface.
Instance MSTP instance.
Sts Port state: root-inconsistent (INCON Root), forwarding (FWD),
listening (LIS), blocking (BLK), or shut down (EDS Shut).
Guard Type Type of STP guard configured (Root, Loop, or BPDU guard).
Example (Guard)
Dell# show spanning-tree msti 5 guard
Interface
Name Instance Sts Guard type
------------------------------------
Te 1/1 5 INCON(Root) Rootguard
Te 1/2 5 FWD Loopguard
Te 1/3 5 EDS(Shut) Bpduguard
spanning-tree
Enable the multiple spanning tree protocol on the interface.
Syntax
spanning-tree
To disable the multiple spanning tree protocol on the interface, use the no spanning-
tree command.
Parameters
spanning-tree Enter the keywords spanning-tree to enable the MSTP on the
interface.
Defaults Enable.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
Multiple Spanning Tree Protocol (MSTP) 1285