Service Manual

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
show cam mac linecard (count)
Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and for
MAC ACLs.
Syntax
show cam mac linecard slot port-set port-pipe count [vlan vlan-id]
[interface interface]
Parameters
linecard slot (REQUIRED) Enter the keyword linecard then a slot number to
select the linecard for which to gather information.
port-set port-pipe (REQUIRED) Enter the keywords port-set then a Port-Pipe
number to select the Port-Pipe for which to gather information.
count (REQUIRED) Enter the keyword count to display CAM usage by
interface type.
interface interface (OPTIONAL) Enter the keyword interface then the interface
type, slot and port information:
• For a port channel interface, enter the keywords port-
channel
then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is
from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Layer 2 1184