Service Manual

Version Description
8.3.12.0 Introduced on the S4810.
Usage Information If you configure mac-learn-limit and the sticky MAC feature is enabled, dynamically
learned MAC addresses are converted to sticky for that port. Any new MAC address that
is learned also becomes sticky for that port.
Related
Commands
• show mac learning-limit — display the details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
Syntax
mac learning-limit station-move-violation {log | shutdown-both |
shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, then the configured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a
station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
shutdown-
offending
Enter the keywords shutdown-offending to shut down the
offending interface and generate a syslog message.
shutdown-original Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Defaults None
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
Layer 2 1182