Service Manual

When a channel member is added to a port-channel and there is not enough ACL CAM
space, the MAC limit functionality on that port-channel is undefined. When this occurs,
un-configure the existing configuration first and then reapply the limit with a lower
value.
Related
Commands
• mac learning-limit mac-address-sticky — replace deprecated no-station-move
parameter.
• show mac learning-limit — display MAC learning-limit configuration.
mac learning-limit learn-limit-violation
Configure an action for a MAC address learning-limit violation.
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-
violation {log | shutdown} command.
Parameters
log Enter the keyword log to generate a syslog message on a
learning-limit violation.
shutdown Enter the keyword shutdown to shut down the port on a
learning-limit violation.
Defaults None
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Layer 2 1180