Service Manual

Related
Commands
• isis hello-multiplier — specify the number of IS-IS hello packets a neighbor must
miss before the router declares the adjacency as down.
isis hello-multiplier
Specify the number of IS-IS hello packets a neighbor must miss before the router declares the adjacency
down.
Syntax
isis hello-multiplier multiplier [level-1 | level-2]
To return to the default values, use the no isis hello-multiplier
[multiplier] [level-1 | level-2] command.
Parameters
multiplier Specifies an integer that sets the multiplier for the hello holding
time. Never configure a hello-multiplier lower than the default
(3). The range is from 3 to 1000. The default is 3.
level-1 (OPTIONAL) Select this value to configure the hello multiplier
independently for Level 1 adjacencies. This value is the default.
level-2 (OPTONAL) Select this value to configure the hello multiplier
independently for Level 2 adjacencies.
Defaults multiplier = 3; level-1 (if not otherwise specified)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Intermediate System to Intermediate System (IS-IS) 1121