Service Manual

• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Introduced on the Z9000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
6.3.1.0 Introduced.
default-information originate
Generates a default route into an IS-IS routing domain and controls the distribution of default information.
Syntax
default-information originate [always] [metric metric] [route-map
map-name]
To disable the generation of a default route into the specified IS-IS routing domain, use
the no default-information originate [always] [metric metric]
[route-map map-name] command.
Parameters
always (OPTIONAL) Enter the keyword always to have the default
route always advertised.
metric metric (OPTIONAL) Enter the keyword metric then a number to assign
to the route. The range is from 0 to 16777215.
route-map map-
name
(OPTIONAL) A default route the routing process generates if the
route map is satisfied.
Intermediate System to Intermediate System (IS-IS) 1099