Service Manual

banner motd
Set a message of the day (MOTD) banner.
Syntax
banner motd c line c
To delete a Message of the Day banner, enter no banner motd.
Parameters
c Enter a delineator character to specify the limits of the text
banner. The delineator is a percent character (%).
line Enter a text string for your MOTD banner the message with your
delineator. The delineator is a percent character (%).
Defaults No banner is configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
Usage Information After entering the banner login command, type one or more spaces and a delineator
character. Enter the banner text then the second delineator character. When the user is
connected to the router, if a message of the day banner is configured, it displays first. If
no message of the day banner is configured, the login banner and prompt appear. After
the user has logged in, the banner EXEC (if configured) displays.
Control and Monitoring 105