Service Manual

longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a
configured prefix list. For more information, refer to the
show ip route list command.
protocol (OPTIONAL) Enter the name of a routing protocol (bgp, isis,
ospf, rip) or the keywords connected or static.
NOTE: bgp, isis, ospf, and rip.
• If you enter bgp, you can include the BGP as-number .
• If you enter isis, you can include the ISIS routing-tag.
• If you enter ospf, you can include the OSPF process-id.
process-id (OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
routing-tag (OPTIONAL) Specify that only ISIS routes with a certain routing
tag must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the
directly connected routes.
all (OPTIONAL) Enter the keyword all to view both active and
non-active routes.
static (OPTIONAL) Enter the keyword static to view only routes the
ip route command configures.
summary (OPTIONAL) Enter the keyword summary. For more information,
refer to the show ip route summary command.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
IPv4 Routing 1019