Service Manual

Version Description
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Regular evaluation optimization enabled/disabled added to
display output.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Example
Dell# show ip protocols
Routing Protocol is "bgp 1"
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
Dell#
show ip route
View information, including how they were learned, about the IP routes on the switch.
Syntax
show ip route [vrf vrf-name] hostname | ip-address [mask] [longer-
prefixes] | list prefix-list | protocol [process-id | routing-tag]
| all | connected | static | summary]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the VRF name to
list the routes in the route table of a specific VRF.
ip-address (OPTIONAL) Specify a name of a device or the IP address of the
device to view more detailed information about the route.
mask (OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
IPv4 Routing 1018