Service Manual

NOTE: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an increasing order
using SNMP. As a workaround, you can use the -C c option in snmpwalk or snmpbulkwalk to
access the Force10 MONITOR MIB. For example: % snmpwalk -C c -v 2c -c public 133.33.33.131
enterprise.6027.3.3.3
Example
Dell-1# show mac accounting destination interface tengigabitethernet 2/1
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/1 1000 10000 5120000
00:44:00:00:00:01 Te 11/1 1000 10000 5120000
00:22:00:00:00:00 Te 11/1 1000 10000 5120000
00:44:00:00:00:02 Te 11/1 2000 10000 5120000
00:44:00:00:00:01 Te 11/1 2000 10000 5120000
Dell-1#
Related Commands
• show mac accounting access-list — display the MAC access list congurations and counters (if congured).
show mac learning-limit
Display MAC address learning limits set for various interfaces.
Syntax
show mac learning-limit [violate-action] [detail] [interface interface]
Parameters
violate-action (OPTIONAL) Enter the keywords violate-action to display the MAC learning limit
violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning limit in detail.
interface interface (OPTIONAL) Enter the keyword interface with the following keywords and the
interface information:
• For a port channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port[/subport] information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
962 Layer 2