Service Manual

Example
(Overlapping Ports)
Dell(conf)# interface range tengigabitethernet 2/3 - 2/11, tengigabitethernet
2/3 - 2/23
Dell(conf-if-range-te-2/3-2/23)#
Usage Information
Only VLAN and port-channel interfaces created using the interface vlan and interface port-channel
commands can be used in the interface range command.
Use the show running-config command to display the VLAN and port-channel interfaces. VLAN or port-
channel interfaces that are not displayed in the show running-config command cannot be used with the bulk
conguration feature of the
interface range command. You cannot create virtual interfaces (VLAN, Port-
channel) using the interface range command.
NOTE: If a range has VLAN, physical and port-channel interfaces, only commands related to physical
interfaces can be bulk congured. To congure commands specic to VLAN and port-channel only
those respective interfaces should be congured in a particular range.
Example (Single
Range)
This example shows a single range bulk conguration.
Dell(config)# interface range tengigabitethernet 5/3 - 5/23
Dell(config-if-range-te-5/3-5/23)# no shutdown
Dell(config-if-range-te-5/3-5/23)#
Example (Multiple
Range)
This example shows how to use commas to add dierent interface types to a range of interfaces.
Dell(config-if)# interface range tengigabitethernet 5/1 - 5/23,
tengigabitethernet 1/1 - 1/2
Dell(config-if-range-te-1/1-1/2,te-5/1-5/23)# no shutdown
Dell(config-if-range-te-1/1-1/2,te-5/1-5/23)#
Example (Multiple
Range)
This example shows how to use commas to add VLAN and port-channel interfaces to the range.
Dell(config-if)# interface range tengigabitethernet 5/1 - 1/23,
tengigabitethernet 1/1 – 1/2,
Vlan 2–100, Port 1–25
Dell(config-if-range-te-1/1-1/2,te-5/1-5/23,vl-2-100,po-1-25)# no shutdown
Dell(config-if-range)#
Related Commands
• interface port-channel — congure a port channel group.
• interface vlan — congure a VLAN interface.
• show cong (from INTERFACE RANGE mode) — display the bulk conguration interfaces.
• show range — display the bulk conguration ranges.
• interface range macro (dene) — dene a macro for an interface-range.
interface range macro (dene)
Denes a macro for an interface range and then saves the macro in the running conguration.
Syntax
define interface range macro name interface , interface , ...
Parameters
name Enter up to 16 characters for the macro name.
interface,
interface,...
Enter the keywords interface range and the interface information. Select the range
of interfaces for bulk conguration. You can enter up to six comma-separated ranges.
Interfaces 691