Service Manual
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
p-snooping max-sessions-per-enodemac
Congure the maximum session limit per ENode MAC address.
Syntax
fip-snooping max—sessions—per—enode—mac max-sessions-value
To return the congured maximum sessions to the default value, use the no fip-snooping max—sessions—
per—enode—mac command.
Parameters
max-sessions-value Enter the maximum number of sessions allowed per ENode MAC address. The range is
from 1 to 64.
Defaults 32
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
9.2(0.2) Introduced on the S4810 and S4820T.
p-snooping port-mode fcf
Congure the port for bridge-to-FCF links.
Syntax
fip-snooping port-mode fcf
602 FIP Snooping