Service Manual

p-snooping enable
Enable FIP snooping on all VLANs or on a specied VLAN.
Syntax
fip-snooping enable
To disable the FIP snooping feature on all or a specied VLAN, use the no fip-snooping enable command.
Defaults FIP snooping is disabled on all VLANs.
Command Modes
• CONFIGURATION
• VLAN INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is 12. The default number of FIP
snooping sessions supported per ENode server is 32. The maximum number of FIP snooping sessions supported
per ENode server is 64.
p-snooping fc-map
Congure the FC-MAP value FIP snooping uses on all VLANs.
Syntax
fip-snooping fc-map fc-map-value
To return the congured FM-MAP value to the default value, use the no fip-snooping fc-map command.
Parameters
fc-map-value Enter the FC-MAP value FIP snooping uses. The range is from 0EFC00 to 0EFCFF.
Defaults 0x0EFC00
Command Modes
• CONFIGURATION
• VLAN INTERFACE
FIP Snooping 601