Service Manual

show running-cong dcb-buer-threshold
Displays the DCB buer threshold details in the running conguration.
Syntax
show running—config dcb-buffer-threshold
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.3(0.0) Introduced on the S6000 platform.
Usage Information
The following table describes the output elds displayed for the show running-config dcb-buffer-
threshold command:
Field Description
Field Description
Prole name Name of the DCB buer threshold prole
Priority The priority of the queue for which the buer space settings apply
buer-size Ingress buer size
pause-threshold-
value
Buer limit at which the port sends the pause to peer in KB.
resume-threshold-
value
Buer oset limit at which the port resumes the peer in KB.
Example
Dell# show running—config dcb-buffer-threshold
!
dcb-buffer-threshold test1
pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
!
dcb-buffer-threshold test2
pfc priority 0 buffer-size 80 pause-threshold 50
!
dcb-buffer-threshold test3
pfc priority 0 buffer-size 80 pause-threshold 60 resume-threshold 30
On interface on which PFC is enabled:
Show interface tengigabitethernet 1/1 pfc buffer-threshold
---------------------------------------------------------------------------------------------
Queue# Lossless Buffer-size Pause-threshold Resume-offset Shared threshold
(KB) (KB) (KB) weight
---------------------------------------------------------------------------------------------
0 No - - - -
1 No - - - -
2 Yes - 20 - 9
3 Yes 52 25 15 0
4 Yes - 45 25 5
5 No - - - -
6 No - - - -
Data Center Bridging (DCB) 513