Manualshelf

Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON
1701170217031704170517061707170817091710
Example (VRRP
VRF)
Dell#show vrrp vrf jay
------------------
fortyGigE 1/50, IPv4 VRID: 20, Version: 2, Net: 10.0.0.3
VRF: 1 jay
State: Master, Priority: 100, Master: 10.0.0.3 (local)
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 38, Gratuitous ARP sent: 0
Virtual MAC address:
00:00:5e:00:01:14
Virtual IP address:
10.0.0.2
Authentication: (none)
Dell# show vrrp vrf jay brief
Interface Group Pri Pre State Master addr Virtual addr(s) Description
---------------------------------------------------------------
Fo 1/50 IPv4 20 100 Y Master 10.0.0.3 10.0.0.2
Dell#
Dell# show vrrp vrf jay
------------------
fortyGigE 1/50, IPv4 VRID: 20, Version: 2, Net: 10.0.0.3
VRF: 1 jay
State: Master, Priority: 100, Master: 10.0.0.3 (local)
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 38, Gratuitous ARP sent: 0
Virtual MAC address:
00:00:5e:00:01:14
Virtual IP address:
10.0.0.2
Authentication: (none)
Dell# show vrrp vrf jay brief
Interface Group Pri Pre State Master addr Virtual addr(s) Description
--------------------------------------------------------------------
Fo 1/50 IPv4 20 100 Y Master 10.0.0.3 10.0.0.2
Dell#
track
Monitor an interface and lower the priority value of the VRRP group on that interface if it is disabled.
Syntax
track interface [priority-cost cost]
To disable monitoring, use the no track interface command.
Parameters
interface (OPTIONAL) Enter the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
•
For a VLAN interface, enter the keyword vlan, and then the VLAN ID. The VLAN ID
range is from 1 to 4094.
priority-cost (OPTIONAL) Enter a number as the amount to subtract from the priority value. The range
is from 1 to 254. The default is 10.
Defaults priority cost = 10
Command Modes VRRP
1706 Virtual Router Redundancy Protocol (VRRP)