Service Manual

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0) Introduced on the S4048–ON.

9.7(0.0) Introduced on the S6000-ON.

9.4.(0.0) Introduced on the S6000.

Related Commands vxlan-instance — Enable VXLAN Instance conguration on the platform.

controller

Congures controller for the VXLAN instance on the platform.

Syntax

controller controller ID ip address port port-number tcp|ptcp|pssl|ssl

Parameters

controller ID Enter the controller ID.

ip address Enter the IP address of the controller.

port port-number (OPTIONAL) Enter the keyword port and the port number.

The range is from 1 to 6632. The default port number is 6632.

tcp (OPTIONAL) Enter the keyword tcp to congure tcp connection to controller.

ptcp (OPTIONAL) Enter the keyword ptcp to congure passive tcp connection to controller.

pssl (OPTIONAL) Enter the keyword pssl to congure passive ssl connection to controller.

ssl (OPTIONAL) Enter the keyword ssl to congure ssl connection to controller (Default).

Defaults Disabled

Command Modes VXLAN INSTANCE