Administrator Guide

Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance statistics remote-vtep-ip
Displays VXLAN statistics for a specific VXLAN tunnel.
Syntax
show vxlan vxlan-instance instance ID statistics remote-vtep-ip IP Address
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
remote-vtep-ip Enter the keyword remote-vtep-ip followed by the IP Address of the remote
VTEP.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Example
DellEMC# show vxlan vxlan-instance 1 statistics remote-vtep-ip 1.1.1.1
Statistics for Remote-vtep-ip : 1.1.1.1
Unicast:
Rx Packets : 0
Rx Bytes : 0
Tx Packets : 0
Tx Bytes : 0
Non-Unicast:
Tx Packets : 0
Tx Bytes : 0
show vxlan vxlan-instance unicast-mac-local
Displays the information of the local unicast MAC associated with the logical network related to Network Virtualization Overlay
(NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID unicast-mac-local [logical—network
name | vnid VNID]
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
name (Optional) Enter the name of VXLAN logical network with a maximum length of 30
characters.
vnid VNID (Optional) Enter the keyword vnid and enter the ID of the VXLAN. The range is
from 1 to 16777215.
Command Modes
● EXEC
● EXEC Privilege
1766 Virtual Extensible LAN (VXLAN)