Administrator Guide

● aes128-cbc
● 3des-cbc
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON, S6000, S6000–ON, S5000, S4810, S4820T, S3048–
ON, S4048–ON, MXL, C9010, S3100 series, and Z9100-ON.
Usage
Information
● You can select one or more ciphers from the list.
● The default list of supported ciphers is same irrespective of whether FIPS mode is enabled or disabled.
● Client-supported cipher list gets preference over the server-supported cipher list in selecting the
cipher for the SSH session.
● When the cipher (-c) option is used with the SSH CLI, it overrides the configured or default
cipher list.
● When FIPS is enabled or disabled, the client ciphers get default configuration.
ip ssh connection-rate-limit
Configure the maximum number of incoming SSH connections per minute.
Syntax
ip ssh connection-rate-limit 1-60
Parameters
1-60 Enter the number of maximum numbers of incoming SSH connections allowed per
minute. The range is from 1 to 60 per minute. The default is 10 per minute.
Defaults 10 per minute
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Increased the SSH rate–limit range.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Security 1483