Users Guide
The maximum number of source ports that can be supported in a session is 128.
The maximum number of destination ports that can be supported is 4 per port pipe.
In the following examples, ports 1/13, 1/14, 1/15, and 1/16 all belong to the same port-pipe. They are pointing to four different destinations
(1/1, 1/2, 1/3, and 1/37). Now it is not possible for another source port from the same port-pipe (for example, 1/17) to point to another
new destination (for example, 1/4). If you attempt to configure another destination (to create 5 MG port), this message displays: %
Error will be thrown in case of RPM and ERPM features.
Example of Changing the Destination Port in a Monitoring Session
Dell(conf-mon-sess-5)#do show moni session
SessID Source Destination Dir Mode Source IP Dest IP
------ ------ ----------- --- ---- --------- --------
1 Gi 1/1 Gi 2/1 both Port N/A N/A
2 Gi 1/1 Gi 2/2 both Port N/A N/A
3 Gi 1/1 Gi 2/3 both Port N/A N/A
4 Gi 1/1 Gi 2/4 both Port N/A N/A
5 Gi 1/1 Gi 2/5 both Port N/A N/A
Dell(conf-mon-sess-5)#
Dell(conf)#mon ses 300
Dell(conf-mon-sess-300)#source gig 1/17 destination gig 1/4 direction tx
% Error: Exceeding max MG ports for this MD port pipe.
Dell(conf-mon-sess-300)#
Dell(conf-mon-sess-300)#source gig 1/17 destination gig 1/1 direction tx
Dell(conf-mon-sess-300)#do show mon session
SessionID Source Destination Direction Mode Type
--------- ------ ----------- --------- ---- ----
0 Gi 1/13 Gi 2/1 rx interface Port-based
10 Gi 1/14 Gi 2/2 rx interface Port-based
20 Gi 1/15 Gi 2/3 rx interface Port-based
30 Gi 1/16 Gi 2/7 rx interface Port-based
300 Gi 1/17 Gi 1/1 tx interface Port-based
Dell(conf-mon-sess-300)#
Example of Configuring Another Monitoring Session with a Previously Used Destination Port
Dell(conf)#mon ses 300
Dell(conf-mon-sess-300)#source Gig 1/17 destination Gig 1/4 direction tx
% Error: Exceeding max MG ports for this MD port pipe.
Dell(conf-mon-sess-300)#
Dell(conf-mon-sess-300)#source Gig 1/17 destination Gig 1/1 direction tx
Dell(conf-mon-sess-300)#do show mon session
SessionID Source Destination Direction Mode Type
--------- ------ ----------- --------- ---- ----
0 Gi 1/13 Gi 1/1 rx interface Port-based
10 Gi 1/14 Gi 1/2 rx interface Port-based
20 Gi 1/15 Gi 1/3 rx interface Port-based
30 Gi 1/16 Gi 1/7 rx interface Port-based
300 Gi 1/17 Gi 1/1 tx interface Port-based
In the example below, 0/25 and 0/26 belong to Port-pipe 1. This port-pipe has the same restriction of only four destination ports, new or
used.
Example of Viewing a Monitoring Session
Dell(conf-mon-sess-300)#do show mon session
SessionID Source Destination Direction Mode Type
--------- ------ ----------- --------- ---- ----
0 Gi 1/13 Gi 1/1 rx interface Port-based
10 Gi 1/14 Gi 1/2 rx interface Port-based
20 Gi 1/15 Gi 1/3 rx interface Port-based
30 Gi 1/16 Gi 1/37 rx interface Port-based
100 Gi 1/25 Gi 1/38 tx interface Port-based
110 Gi 1/26 Gi 1/39 tx interface Port-based
300 Gi 1/17 Gi 1/1 tx interface Port-based
Dell(conf-mon-sess-300)#
Given these parameters, the following illustration shows the possible port monitoring configurations.
512
Port Monitoring