Service Manual

• Display most of the information in show system, but in a more convenient tabular form.
EXEC Privilege mode
show system brief
Refer to the following example.
• Display the same information in show system, but only for the specied unit.
EXEC Privilege mode
show system stack-unit
Refer to the following example.
• Display topology and stack link status for the entire stack.
EXEC Privilege mode
show system stack-ports [status | topology]
Refer to the following example.
Examples of the show system Commands
Display information about an S3048–ON stack using the show system command.
The following is an example of the show system command to view the stack details.
Dell#show system
Stack MAC : 00:01:e8:8a:df:e6
Reload Type : normal-reload
-- Unit 0 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S4810 - 52-port GE/TE/FG (SE)
Current Type : S4810 - 52-port GE/TE/FG (SE)
Master priority : 0
Hardware Rev : 3.0
Num Ports : 64
Up Time : 57 min, 0 sec
Dell Networking OS Version : 8-3-7-13
Jumbo Capable : yes
POE Capable : no
Burned In MAC : 00:01:e8:8a:df:e6
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus
------------------------------------------
0 0 absent absent
0 1 up AC up
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
-------------------------------------------
0 0 up up 6960 up 6960
0 1 up up 6720 up 6720
Speed in RPM
-- Unit 1 --
Unit Type : Member Unit
Status : not present
Required Type : S4810 - 52-port GE/TE/FG (SE)
-- Unit 2 --
Unit Type : Member Unit
Status : not present
Stacking
739