Service Manual

The default is 0.
3. (Optional) Identify the tracked object with a text description.
OBJECT TRACKING mode
description text
The text string can be up to 80 characters.
4. (Optional) Display the tracking conguration and the tracked object’s status.
EXEC Privilege mode
show track object-id
Example of the track ip route reachability Command
Example of the track ipv6 route reachability Command
Dell(conf)#track 104 ip route 10.0.0.0/8 reachability
Dell(conf-track-104)#delay up 20 down 10
Dell(conf-track-104)#end
Dell#show track 104
Track 104
IP route 10.0.0.0/8 reachability
Reachability is Down (route not in route table)
2 changes, last change 00:02:49
Tracked by:
Dell#configure
Dell(conf)#track 4 ip route 3.1.1.0/24 reachability vrf
vrf1
Dell(conf)#track 105 ipv6 route 1234::/64 reachability
Dell(conf-track-105)#delay down 5
Dell(conf-track-105)#description Headquarters
Dell(conf-track-105)#end
Dell#show track 105
Track 105
IPv6 route 1234::/64 reachability
Description: Headquarters
Reachability is Down (route not in route table)
2 changes, last change 00:03:03
Tracking a Metric Threshold
Use the following commands to congure object tracking on the metric threshold of an IPv4 or IPv6 route.
To remove object tracking, use the no track object-id command.
1. (Optional) Recongure the default resolution value used by the specied protocol to scale the metric for IPv4 or IPv6 routes.
CONFIGURATION mode
track resolution {ip route | ipv6 route} {isis resolution-value | ospf resolution-value}
The range of resolution values is:
• ISIS routes - 1 to 1000. The default is 1.
• OSPF routes - 1 to 1592. The efault is 1.
2. Congure object tracking on the metric of an IPv4 or IPv6 route.
CONFIGURATION mode
track object-id {ip route ip-address/prefix-len | ipv6 route ipv6-address/prefix-len}
metric threshold [vrf vrf-name]
Valid object IDs are from 1 to 65535.
Object Tracking
495