Service Manual

example, that type of port is referred to as a VLAN trunk port, but it is not necessary to specically identify to the Dell Networking
OS that the port is a trunk port.
Figure 34. Global GVRP Conguration Example
Basic GVRP conguration is a two-step process:
1. Enabling GVRP Globally
2. Enabling GVRP on a Layer 2 Interface
Related Conguration Tasks
Congure GVRP Registration
Congure a GARP Timer
Enabling GVRP Globally
To congure GVRP globally, use the following command.
Enable GVRP for the entire switch.
CONFIGURATION mode
gvrp enable
Example of Conguring GVRP
Dell(conf)#protocol gvrp
Dell(config-gvrp)#no disable
GARP VLAN Registration Protocol (GVRP)
273