Service Manual

The default is 24 hours.
Specifying a Default Gateway
The IP address of the default router should be on the same subnet as the client.
To specify a default gateway, follow this step.
• Specify default gateway(s) for the clients on the subnet, in order of preference.
DHCP <POOL>
default-router address
Congure a Method of Hostname Resolution
Dell systems are capable of providing DHCP clients with parameters for two methods of hostname resolution—using DNS or
NetBIOS WINS.
Using DNS for Address Resolution
A domain is a group of networks. DHCP clients query DNS IP servers when they need to correlate host names to IP addresses.
1. Create a domain.
DHCP <POOL>
domain-name name
2. Specify in order of preference the DNS servers that are available to a DHCP client.
DHCP <POOL>
dns-server address
Using NetBIOS WINS for Address Resolution
Windows internet naming service (WINS) is a name resolution service that Microsoft DHCP clients use to correlate host names to IP
addresses within a group of networks. Microsoft DHCP clients can be one of four types of NetBIOS nodes: broadcast, peer-to-peer,
mixed, or hybrid.
1. Specify the NetBIOS WINS name servers, in order of preference, that are available to Microsoft Dynamic Host Conguration
Protocol (DHCP) clients.
DHCP <POOL> mode
netbios-name-server address
2. Specify the NetBIOS node type for a Microsoft DHCP client. Dell Networking recommends specifying clients as hybrid.
DHCP <POOL> mode
netbios-node-type type
Creating Manual Binding Entries
An address binding is a mapping between the IP address and the media access control (MAC) address of a client.
The DHCP server assigns the client an available IP address automatically, and then creates an entry in the binding table. However,
the administrator can manually create an entry for a client; manual bindings are useful when you want to guarantee that a particular
network device receives a particular IP address. Manual bindings can be considered single-host address pools. There is no limit on
the number of manual bindings, but you can only congure one manual binding per host.
NOTE: Dell Networking OS does not prevent you from using a network IP as a host IP; be sure to not use a network IP as
a host IP.
1. Create an address pool.
Dynamic Host Conguration Protocol (DHCP)
241