Owners Manual

Dell EMC diagnostics
The following describes the Dell EMC diagnostics. These instructions apply to systems for which the ONIE diagnostics are not available.
ONIE expansion
To view all the ONIE commands available, from the ONIE prompt, enter onie- and click <tab> twice.
ONIE:/ # onie- <TAB><TAB>
onie-boot-mode onie-fwpkg onie-syseeprom
onie-console onie-nos-install onie-sysinfo
onie-discovery-start onie-self-update onie-uninstaller
onie-discovery-stop onie-support
Topics:
• S4048–ON or S3048–ON diagnostic package
• Dell EMC diagnostic test suite
• System information
• CPLD versions
• Factory defaults restore
S4048–ON or S3048–ON diagnostic package
To install the S4048–ON or S3048–ON diagnostic package on your system, follow these steps.
NOTE
: Before you begin, go to http://www.dell.com/support and download the diagnostic package. You will need your Dell EMC
support access account to download the package.
1 Boot your system to ONIE.
2 Enter the onie-discovery-stop command to stop the ONIE discovery mode (ONIE:/ # onie-discovery-stop).
3 Congure the management interface to download the image using ONIE:/ # ifconfig eth0 xx.xx.xx.xx/xx up. Also
ping the server/network IP address.
ONIE:/ # ifcong eth0 xx.xx.xx.xx/xx up
ONIE:/ # ping -c4 xx.xx.xx.xx
PING xx.xx.xx.xx (xx.xx.xx.xx): 56 data bytes
64 bytes from xx.xx.xx.xx: seq=0 ttl=64 time=0.446 ms
64 bytes from xx.xx.xx.xx: seq=1 ttl=64 time=0.198 ms
64 bytes from xx.xx.xx.xx: seq=2 ttl=64 time=0.183 ms
64 bytes from xx.xx.xx.xx: seq=3 ttl=64 time=0.163 ms
--- xx.xx.xx.xx ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.163/0.247/0.446 ms
ONIE:/ #
4 Install the image using the onie-nos-install command.
ONIE:/ # onie-nos-install tftp://xx.xx.xx.xx/INSTALLER-DND-SK-x.x.x.xx.bin
Stopping: discover... done.
ONIE: Executing installer: ./INSTALLER-DND-SK-x.x.x.x.BIN ...
INSTALLER-DND-SK-1.0 3% |* | 878k 0:00:29 ETA
INSTALLER-DND-SK-1.0 12% |*** | 3477k 0:00:13 ETA
3
Dell EMC diagnostics 9