Deployment Guide

29 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
4. Verify the interface includes all required VLANs and EPGs. Repeat for remaining interfaces as
needed.
Repeat steps 1 through 4 for the remaining leaf switch.
9.2.3 Verify ACI is learning endpoints
To verify that ACI is learning endpoints, do the following:
1. In the APIC GUI, go to Tenants > Tenant name > Application Profiles > Application Profile name
> Application EPGs > select an Application EPG.
2. Click Operational at the top of the right pane as shown in Figure 16.
Cisco ACI endpoints in app EPG1
3. All learned endpoints for the selected EPG are displayed along with their VLAN, IP address, and
interface.
Repeat the steps in this section for the remaining Application EPGs.