Deployment Guide

25 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
9.1.5 show spanning-tree brief command
The show spanning-tree brief command validates that STP is enabled on the leaf switches. All
interfaces are forwarding (FWD), as shown in the Sts column.
S5248F-1# show spanning-tree brief
Spanning tree enabled protocol rstp with force-version rstp
Executing IEEE compatible Spanning Tree Protocol
Root ID Priority 4096, Address 54bf.64be.f540
Root Bridge hello time 2, max age 20, forward delay 15
Bridge ID Priority 4096, Address 54bf.64be.f540
We are the root
Configured hello time 2, max age 20, forward delay 15
Flush Interval 200 centi-sec, Flush Invocations 62
Flush Indication threshold 65535
Interface Designated
Name PortID Prio Cost Sts Cost Bridge ID
PortID
--------------------------------------------------------------------------------
ethernet1/1/3 128.524 128 800 FWD 0 4096
54bf.64be.f540 128.524
ethernet1/1/4 128.528 128 800 FWD 0 4096
54bf.64be.f540 128.528
port-channel100 128.2616 128 50 FWD 0 4096
54bf.64be.f540 128.2616
Interface
Name Role PortID Prio Cost Sts Cost
Link-type Edge
--------------------------------------------------------------------------------
ethernet1/1/3 Desg 128.524 128 800 FWD 0
AUTO Yes
ethernet1/1/4 Desg 128.528 128 800 FWD 0
AUTO Yes
port-channel100 Desg 128.2616 128 50 FWD 0
AUTO No
9.1.6 show uplink state group command
The show uplink-state-group command provides information about the status of the uplink state group.
A status of Enabled,up shows that Uplink Failure Detection (UFD) is operational.
S5248F-1# show uplink-state-group 1
Uplink State Group: 1, Status: Enabled,up