Deployment Guide

24 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
9.1.2 show vlt [domain-id] vlt-port-detail command
The show vlt domain-id vlt-port-detail command shows the VLT port channel status for both VLT
peers. The VLT in this example is connected to the Cisco ACI vPC. It is automatically configured in port
channel 100, and it consists of two ports on each switch.
S5248F-1# show vlt 127 vlt-port-detail
vlt-port-channel ID : 100
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------------
* 1 port-channel100 up 2 2
2 port-channel100 up 2 2
9.1.3 show interface port channel summary command
The show interface port-channel summary command shows the LAG number (VLT port channel 100
in this example), the mode, status, and ports used in the port channel.
S5248F-1# show interface port-channel summary
LAG Mode Status Uptime Ports
100 L2-HYBRID up 03:47:13 Eth 1/1/55 (Up)
Eth 1/1/56 (Up)
9.1.4 show lldp neighbors command
The show lldp neighbors command provides information about connected devices. In this case,
ethernet1/1/55 and ethernet1/1/56 connect to the two Cisco ACI leaf switches. Ports
ethernet1/1/3 and ethernet1/1/4 connect to servers within the Dell EMC rack. The remaining links,
ethernet1/1/53 and ethernet 1/1/54, are the ports that are used for the VLTi.
S5248F-1# show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
--------------------------------------------------------------------------------
ethernet1/1/3 Not Advertised 24:8a:07:28:07:fa 24:8a:07:28:07:fc
ethernet1/1/4 Not Advertised 24:8a:07:3b:ec:e4 24:8a:07:3b:ec:e6
ethernet1/1/53 S5248F-2 ethernet1/1/54 54:bf:64:ba:33:c0
ethernet1/1/54 S5248F-2 ethernet1/1/53 54:bf:64:ba:33:c0
ethernet1/1/55 Leaf1 Eth1/51 00:be:75:19:40:13
ethernet1/1/56 Leaf2 Eth1/51 4c:77:6d:f1:ee:7d
mgmt1/1/1 OS10 ethernet1/1/5 64:00:6a:c6:f4:a0