API Guide

11.0.0.2 vlan11 00:00:43/00:01:33 v2 10 / S
12.0.0.2 vlan12 00:01:01/00:01:44 v2 10 / S
12.0.0.3 vlan12 00:01:01/00:01:43 v2 1000 / DR S
13.0.0.2 vlan13 00:01:02/00:01:42 v2 1000 / DR S
AG1 中的 IGMP 和 PIM 状态
show ip igmp groups 命令输出将显示 IGMP 数据库。
AG1# show ip igmp groups
Total Number of Groups: 1
IGMP Connected Group Membership
Group Address Interface Mode Uptime
Expires Last Reporter
225.1.1.1 vlan11 Exclude 00:01:55
00:01:53 0.0.0.0
show ip pim tib 命令输出将显示 PIM 树信息库 (TIB)。
AG1# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 225.1.1.1), uptime 00:02:05, expires 00:00:54, RP 103.0.0.3, flags: SCJ
Incoming interface: vlan12, RPF neighbor 12.0.0.3
Outgoing interface list:
vlan11 Forward/Sparse 00:02:05/Never
show ip pim mcache 命令输出将显示多播路由条目。
AG1# show ip pim mcache
PIM Multicast Routing Cache Table
(*, 225.1.1.1)
Incoming interface : vlan12
Outgoing interface list :
vlan11
AG1-VLT-NODE-1# show ip pim mcache vlt
PIM Multicast Routing Cache Table
Flags: S - Synced
(*, 225.1.1.1)
Incoming interface : vlan12
Outgoing interface list :
vlan11
以下 show 命令输出显示流量流建立后的流量：
show ip pim tib 命令将显示 PIM 树信息库。
AG1# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 225.1.1.1), uptime 00:10:15, expires 00:00:44, RP 103.0.0.3, flags: SCJ
Incoming interface: vlan12, RPF neighbor 12.0.0.3
Outgoing interface list:
vlan11 Forward/Sparse 00:10:15/Never
790
多播