API Guide

OS10(conf-range-eth1/1/1-1/1/4)# exit
OS10(config)# default interface range ethernet 1/1/1,1/1/2-1/1/4
Proceed to cleanup interface range config? [confirm yes/no]:yes
Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete
is successful. IP 192.21.43.1/31 deleted successfully
Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete
is successful. IP 2000:21:43::21:43:1/127 deleted successfully
Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete
is successful. IP 192.28.43.1/31 deleted successfully
Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete
is successful. IP 2000:28:43::28:43:1/127 deleted successfully
Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete
is successful. IP 192.41.43.1/31 deleted successfully
Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete
is successful. IP 2000:41:43::41:43:1/127 deleted successfully
Mar 5 22:21:12 OS10 dn_ifm[602]: Node.1-Unit.1:PRI:notice [os10:trap],
%Dell EMC (OS10) %log-notice:IFM_OSTATE_UP: Interface operational state is
up :vlan1
OS10(config)# interface range ethernet 1/1/1-1/1/4
OS10(conf-range-eth1/1/1-1/1/4)# show configuration
!
interface ethernet1/1/1
no shutdown
switchport access vlan 1
!
interface ethernet1/1/2
no shutdown
switchport access vlan 1
!
interface ethernet1/1/3
no shutdown
switchport access vlan 1
!
interface ethernet1/1/4
no shutdown
switchport access vlan 1
OS10(conf-range-eth1/1/1-1/1/4)#
支持的版本
10.4.0E(R1) or later
Identifier GUID-966D250A-D5E0-471B-8FE0-C6D00D6F3E64
Version 3
Status Translation approved
default vlan-id
重新配置默认 VLAN 的 VLAN ID。
语法
default vlan-id vlan-id
参数
vlan-id — 输入默认 VLAN ID 号，从 1 到 4093。
默认
VLAN1
命令模式
CONFIGURATION
使用情况信息
默认情况下，VLAN1 用作默认 VLAN，用于在中继或访问模式下切换 OS10 端口上未标记的 L2 流量。如果将
VLAN1 用于网络特定的数据流量，请重新配置默认 VLAN 的 VLAN ID。命令会重新配置交换机访问模式中所
有端口的访问 VLAN ID（默认 VLAN）。在将 VLAN ID 配置为默认 VLAN 之前，请确保其存在。
接口
263