Administrator Guide

VLT Role: Secondary
System MAC address: 00:01:e8:8a:df:bc
System Role Priority: 32768
Local System MAC address: 00:01:e8:8a:df:e6
Local System Role Priority: 32768
show vlt statistics
Displays VLT operations statistics.
Syntax
show vlt statistics [arp | domain | igmp-snoop | mac | multicast | ndp]
Parameters
arp Enter the keyword arp to display the ARP VLT statistics.
domain Enter the keyword domain to display the domain VLT statistics.
igmp-snoop Enter the keywords igmp-snoop to display the IGMP snooping VLT statistics.
mac Enter the keyword mac to display the VLT MAC addresses VLT statistics.
multicast Enter the keyword multicast to display the multicast VLT statistics.
ndp Enter the keyword ndp to display the NDP VLT statistics.
Default Not configured.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Added parameters multicast and ndp
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Added support in the output for ARP, MAC, and IGMP snooping.
8.3.8.0 Introduced on the S4810.
Related
Commands
• clear vlt statistics — clears the statistics on VLT operations.
Example
NOTE: The following example shows the statistics for all the VLT parameters. If you enter a
specific keyword, such as mac, only the statistics for that VLT parameter displays.
Dell_VLTpeer1# show vlt statistics
VLT Statistics
1602 Virtual Link Trunking (VLT)