Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1511

postalcode |

zipcode

company-

code

(OPTIONAL) Enter the keyword postalcode or zipcode then the postal code or zip

code for the company site, as one string with no spaces.

Command Modes SUPPORTASSIST COMPANY

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.

9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,

Z9500, MXL.

Usage Information

The optional parameters must be provided in the following order: city state country postalcode. If

specified in a different order, the command returns an error as follows:

DellEMC(conf-supportassist-cmpy-test)# address city Minneapolis postalcode

55344 country USA state Minnesota

% Error: Invalid input at "^" marker.

This command is optional for SupportAssist service configuration.

Example

DellEMC(conf-supportassist-cmpy-test)# address city Minneapolis state Minnesota

country USA postalcode 55344

street-address

Configure the street address information for the company.

Syntax

street-address {address1} [address2]…[address8]

To remove the street address, use the no street-address command.

Parameters

address1

Enter the street address for the company.

address2..address

(OPTIONAL) Enter the street address of the company site. Up to 8 fields are allowed.