Administrator Guide

There were 1 successful login attempt(s) for user admin in the last 30
day(s).
The preceding message shows that the user had previously logged in to the system using the console line. It also
displays the number of unsuccessful login attempts since the last login and the number of unsuccessful login
attempts during a custom time period.
Related
Commands
• login concurrent-session — configures the limit of concurrent sessions for each user on console and virtual
terminal lines.
• show login statistics — displays login statistics of users who have used the console or virtual terminal lines to
log in to the system.
motd-banner
Enable a message of the day (MOTD) banner to appear when you log in to the system.
Syntax
motd-banner
To disable the MOTD banner, use the no motd-banner command.
Defaults Enabled on all lines.
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
ping
Test connectivity between the system and another device by sending echo requests and waiting for replies.
Syntax
ping [host | ip-address | ipv6-address] [count {number | continuous}]
[datagram-size] [timeout] [source (ip src-ipv4-address) | interface] [tos] [df-
bit (y|n)] [validate-reply(y|n)] [outgoing-interface] [pattern pattern] [sweep-
Control and Monitoring 113