Users Guide

no-rtr-address Enter the keyword no-rtr-address to exclude the full router address from router
advertisements (the R bit is not set).
o-link Enter the keywords off-link to advertise the prex without stating to recipients that
the prex is either on-link or o-link.
valid-lifetime |
innite
Enter the amount of time that the prex is advertised, or enter infinite for an
unlimited amount of time. The range is from 0 to 4294967295. The default is 2592000.
The maximum value means that the preferred lifetime does not expire for the valid-life
time parameter.
preferred-lifetime |
innite
Enter the amount of time that the prex is preferred, or enter infinite for an unlimited
amount of time. The range is from 0 to 4294967295. The default is 604800. The
maximum value means that the preferred lifetime and does not expire.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.2.0 Introduced on the E-Series, C-Series, and S-Series.
Usage Information By default, all prexes congured as addresses on the interface are advertised. This command allows control over
the individual parameters per prex; you can use the default keyword to use the default parameters for all
prexes. If a prex has been congured with lifetime parameter values, the default values cannot be applied using
the ipv6 nd prefix default no-autoconfig command.
ipv6 route
Establish a static IPv6 route.
Syntax
ipv6 route [vrf vrf-name] ipv6-address prefix-length {ipv6-address | interface
| interface ipv6-address} [distance] [tag value] [permanent] [weight weight-
value]
To remove the IPv6 route, use the no ipv6 route command.
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to install IPv6 routes in
that VRF.
818 IPv6 Basics