Users Guide

keepalives Enter the keyword keepalives to view BGP keepalives.
notications Enter the keyword notifications to view BGP notications.
soft-reconguration Enter the keywords soft-reconfiguration to view only information on inbound
BGP soft reconguration.
updates Enter the keyword updates to view BGP updates.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
To view information on both incoming and outgoing routes, do not include the in and out parameters in the
debugging command. The in and out parameters cancel each other; for example, if you enter the debug ip
bgp in
command and then enter the debug ip bgp out command, you do not see information on the
incoming routes.
Entering a no debug ip bgp command removes all congured debug commands for BGP.
Related Commands
• debug ip bgp events — view information about BGP events.
• debug ip bgp keepalives — view information about BGP keepalives.
• debug ip bgp notications — view information about BGP notications.
• debug ip bgp updates — view information about BGP updates.
• show debugging — view enabled debugging operations.
debug ip bgp dampening
View information on routes being dampened.
Syntax
debug ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6 unicast]
dampening
Border Gateway Protocol 369