Users Guide

ip access-group
Apply an egress IP ACL to the ACL VLAN group.
Syntax
ip access-group {group name} out implicit-permit
Parameters
group-name Enter the name of the ACL VLAN group where you want the egress IP ACLs applied, up
to 140 characters.
out Enter the keyword out to apply the ACL to outgoing trac.
implicit-permit
Enter the keyword implicit-permit to change the default action of the ACL from
implicit-deny to implicit-permit (that is, if the trac does not match the lters in the ACL,
the trac is permitted instead of dropped).
Default None
Command Modes CONFIGURATION (conf-acl-vl-grp)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, and Z9000 platforms.
Usage Information You can apply only an egress IP ACL on an ACL VLAN group.
show acl-vlan-group
Display all the ACL VLAN groups or display a specic ACL VLAN group, identied by name.
Syntax
show acl-vlan-group {group-name | detail}
Parameters
group-name (Optional) Display only the ACL VLAN group that is specied, up to 140 characters.
detail
Display information in a line-by-line format to display the names in their entirety.
Without the detail option, the output displays in a table style and information may be
truncated.
Default No default behavior or values
Command Modes
EXEC
EXEC Privilege
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM) 315